Description

Studio Composite RC-SC EX Plus Handles

Labeled “Daiwa/Abu” have a 8x5mm hole(will work with Shimano 300 and up as well as Lews, Abu Garcia, Bates)

Labeled “Shimano” have a 7x4mm hole

Can be attached to most Shimano, Daiwa and Abu reels. (Each manufacturer’s dedicated nut is equipped as standard.) *Some reels and Daiwa C-bolt type (Steez, Zillion, Ryoga, Z, Morethan, etc.) require a separate C-bolt.

Its rugged appearance is unimaginably light and it is the strongest handle, with the ultimate in sensitivity and torque. A handle that will give you the ultimate advantage when facing monsters has been born.

It is lightweight, highly rigid, and has a monocoque (hollow structure) that maximizes sensitivity. The carbon knob is coated with a matte rubber coating to increase grip on the handle. The carbon allows unprecedented and ultimate sensitivity, it will accurately transmit signals from under the water.The RC-SC EX uses a tough 5mm carbon plate, enabling high torque steering. The carbon fiber is arranged at 45 and 90 angles, providing the strength to withstand twisting loads from all directions. In addition, a crank shape is used to reduce twisting, and the plate is made of carbon prepreg, achieving rigidity never before achieved.

Instead of using the 4mm shaft that is used in most freshwater reels, Studio Composite adopted a strong 5mm shaft use for saltwater fishing. The carbon plate is made strong and 5mm thick, because the load is concentrated on the conventional shaft size and it would break. Therefore, by increasing the rigidity of the shaft, the power balance of the entire handle is made uniform and the overall rigidity is increased.

[For Shimano] [For Daiwa/Abu] Common washers and left and right dedicated nuts are included.
*For some Daiwa reels, a separate C bolt will be required. (See compatibility chart)